GW Instek GSP-930 Programming Manual - Manual (Page 128)

GSP-930 Programming Manual
126
Parameter/
Return parameter <integer> <NR1>
Example :AVER:COUN 20
[:SENSe]:AVERage:STATe
Set
Query
Description Turns the Average function on/off or queries its
state.
Syntax [:SENSe]:AVERage:STATe {OFF|ON|0|1}
Query Syntax [:SENSe]:AVERage:STATe?
Parameter 0 Turn the Average function off.
1 Turn the Average function on.
OFF Turn the Average function off.
ON Turn the Average function on.
Return parameter 0 The Average function is off.
1 The Average function is on.
Example :AVER:STAT ON
[:SENSe]:AVERage:TYPE
Set
Description Sets the method that the Average function uses to
calculate the average.
Syntax [:SENSe]:AVERage:TYPE
{VOLTage|LOGarithmic|POWer}
Query syntax [:SENSe]:AVERage:TYPE?
Parameter/Return
parameter VOLTage Sets Average to voltage
LOGarithmic Sets Average to logarithmic
POWer Sets Average to power
Example :AVER:TYPE VOLT
[:SENSe]:BANDwidth|BWIDth[:RESolution]
Set
Query
Description Sets or queries the resolution bandwidth (RBW).