GW Instek GSP-930 Programming Manual - Manual (Page 81)

REMOTE CONTROL
79
Example :CALC:LIM:STAT 1
:CALCulate:LIMit<n>:TRACe
Set
Description Creates a limit line from the currently selectly trace
with a user defined offset.
Syntax :CALCulate:LIMit<n>:TRACe <offset>
Parameter <n> <NR1> limit line 1~5
<offset> <NR3> in dB
Example :CALC:LIM2:TRAC 10
:CALCulate:MARKer:AOFF
Set
Description Turns all the markers off.
Syntax :CALCulate:MARKer:AOFF
Example :CALC:MARK:AOFF
:CALCulate:MARKer<n>:FCOunt:
RESolution
Set
Query
Description Sets or queries the frequency counter resolution in
Hz for the selected marker.
Syntax :CALCulate:MARKer<n>:FCOunt:RESolution <freq>
Query Syntax :CALCulate:MARKer<n>:FCOunt:RESolution?
Parameter <n> <NR1>Maker number 1~6*.
<freq> Frequency resolution in Hz**.
Return parameter <freq> Frequency resolution in Hz.
Note * Only one marker can be selected at a time to use the
marker counter function.
The selected marker counter will disable the
previously selected marker counter.
** Only 1000, 100, 10, 1 Hz are meaningful.