GW Instek GSP-930 Programming Manual - Manual (Page 119)

REMOTE CONTROL
117
:MMEMory:STORe:TRACe
Set
Description Store trace data to a file from the internal memory.
Syntax :MMEMory:STORe:TRACe <trace name>,
<new_dest_file_name>
Parameter <trace name> <NR1> 1~4
<new_dest_file_name> XXX.tra
Example :MMEM:STORe:TRAC 2,test.tra
OUTPut Commands
:OUTPut[:STATe] ................................................................ 117
:OUTPut[:STATe]
Set
Query
Description Turns the tracking generator output on/off or
queries its state.
Syntax :OUTPut[:STATe] {OFF|ON|0|1}
Query Syntax :OUTPut[:STATe]?
Parameter 0 Turn TG output off.
1 Turn TG output on.
OFF Turn TG output off.
ON Turn TG output on.
Return parameter 0 TG output is off.
1 TG output is on.
Example :OUTP ON