GW Instek GSP-930 Programming Manual - Manual (Page 131)

REMOTE CONTROL
129
Syntax [:SENSe]:CNR:CHANnel:SPACe <freq>
Query Syntax [:SENSe]:CNR:CHANnel:SPACe?
Parameter <freq> <NRf>
Return parameter <NR3> Hz
Example :CNR:CHAN:SPAC 6.0e+6
[:SENSe]:CNR:DELTamarker:MODE
Set
Description Turns the CNR Noise Marking function to
Min(AUTO) or ΔMarker(MANual).
Syntax [:SENSe]:CNR:DELTamarker:MODE {AUTO|MANual }
Parameter AUTO Sets the Noise Marking to Min.
ΔMarker Sets the Noise Marking to ΔMarker.
Example :CNR:DELT:MODE AUTO
[:SENSe]:CORRection:CSET<n>:DATA
Set
Query
Description As a command, sets an offset for a certain
frequency for a selected correction set.
As a query, returns the data contents for the
selected correction set as <csv data>. The data will
be arranged as:
pt#1 freq, pt#1 offset, pt#2 freq, pt#2 offset,...
Syntax [:SENSe]:CORRection:CSET<n>:DATA <freq>,<offset>
Query syntax [:SENSe]:CORRection:CSET<n>:DATA?
Parameter
<freq> <NRf> Hz
<offset> <NRf> dB
<n> <NR1>correction set number
Return parameter <CSV data> pt#1 freq, pt#1 offset,….. pt#n freq, pt#n
offset
Example CORR:CSET1:DATA 2e+6,30