GW Instek GSP-930 Programming Manual - Manual (Page 124)

GSP-930 Programming Manual
122
Parameter <ampl> <NRf3> power or voltage
Return parameter <NR3>
Example :ACPR:ACH1:LLIM -5.0e+1
[:SENSe]:ACPR:ACHannel<n>:OFFSet
Set
Query
Description Sets or queries the adjacent channel offset for the
selected adjacent channel. Used with ACPR
measurement.
Syntax [:SENSe]:ACPR:ACHannel<n>:OFFSet <freq>
Query Syntax [:SENSe]:ACPR:ACHannel<n>:OFFSet?
Parameter <freq> <NRf>
Return parameter <NR3> Hz
Example :ACPR:ACH1:OFFSet 2.0e+6
[:SENSe]:ACPR:BANDwidth|BWIDth
Set
Query
Description Sets or queries the main channel bandwidth for
ACPR measurements.
Syntax [:SENSe]:ACPR:BANDwidth|BWIDth <freq>
Query Syntax [:SENSe]:ACPR:BANDwidth|BWIDth?
Parameter <freq> <NRf>
Return parameter <NR3> Hz
Example :ACPR: BAND 2.0e+6
[:SENSe]:ACPR:HLIMit
Set
Query
Description Sets or queries the high limit for the main channel.
Used with ACPR measurement.
Syntax [:SENSe]:ACPR:HLIMit <ampl>
Query Syntax [:SENSe]:ACPR:HLIMit?