GW Instek GSP-930 Programming Manual - Manual (Page 139)

REMOTE CONTROL
137
[:SENSe]:FREQuency:STARt
Set
Query
Description Sets or queries the start frequency.
Syntax [:SENSe]:FREQuency:STARt <freq>
Query Syntax [:SENSe]:FREQuency:STARt?
Parameter <freq> <NRf>
Return parameter <NR3> Hz
Example FREQ:STAR: 0
[:SENSe]:FREQuency:STOP
Set
Query
Description Sets or queries the stop frequency.
Syntax [:SENSe]:FREQuency:STOP <freq>
Query Syntax [:SENSe]:FREQuency:STOP?
Parameter <freq> <NRf>
Return parameter <NR3> Hz
Example FREQ:STOP: 1.0e+6
[:SENSe]:LIMit<n>:DELete
Set
Description Deletes the chosen limit line.
Syntax [:SENSe]:LIMit<n>:DELete
Parameter <n> <NR1> limit line number
Example :LIM3:DEL
[:SENSe]:JITTer:OFFSet:STARt
Set
Query
Description Sets or queries the start offset for phase jitter
measurements.
Syntax [:SENSe]:JITTer:OFFSet:STARt <freq>