GW Instek GSP-930 Programming Manual - Manual (Page 84)

GSP-930 Programming Manual
82
Parameter <n> <NR1> Maker number 1~6.
Return parameter <NR3> Normalized noise level in the Y-axis unit.
Example :CALC:MARK1:NOIS:Y?
>1.166e+2
:CALCulate:MARKer<n>:PEAK
Set
Description Sets the selected marker to the selected peak.
Query Syntax :CALCulate:MARKer<n>:PEAK {MAXimum|
MINimum|NEXT|RIGHt|LEFT}
Parameter <n> <NR1> Marker number 1~6
MAXimum Highest peak value
MIMimum Lowest peak value
NEXT Next peak
RIGHt Next peak right
LEFT Next peak left
Example :CALC:MARK1:PEAK NEXT
:CALCulate:MARKer:PEAK:CTRack:STATe
Set
Query
Description Sets or queries the state of the Peak Track function.
The Peak Track function only applides to the
currently selected marker.
Syntax :CALCulate:MARKer:PEAK:CTRack:STATe
{ON|OFF|1|0}
Query Syntax :CALCulate:MARKer:PEAK:CTRack:STATe?
Parameter 0 Turn peak track off.
1 Turn peak track on.
OFF Turn peak track off.
ON Turn peak track on.
Return parameter 0 Peak track is off.
1 Peak track is on.
Example :CALC:MARK:PEAK:CTR:STAT ON