GW Instek GSP-930 Programming Manual - Manual (Page 77)

REMOTE CONTROL
75
Return parameter 0 FM Analysis is off.
1 FM Analysis is on.
Example :CALC:DEM:FM:STAT 1
:CALCulate:DEMod:RESet
Set
Description This command will reset the max and min records
for the current demodulation analysis.
Syntax :CALCulate:DEMod:RESet
:CALCulate:JITTer:STATe
Set
Query
Description Sets or queries the state of the Jitter Analysis
function.
Syntax :CALCulate:JITTer:STATe {ON|OFF|1|0}
Query Syntax :CALCulate:JITTer:STATe?
Parameter 0 Turn Jitter Analysis off.
1 Turn Jitter Analysis on.
OFF Turn Jitter Analysis off.
ON Turn Jitter Analysis on.
Return parameter 0 Jitter Analysis is off.
1 Jitter Analysis is on.
Example :CALCulate:JITTer:STATe 1
:CALCulate:JITTer:CARRier:POWer?
Query
Description Returns the carrier power in the current Y-axis
units.
Query Syntax :CALCulate:JITTer:CARRier:POWer?
Return parameter <NR3> In the current Y-axis units.
Query Example :CALC:JITT:CARR:POW?
>-5.237e+01