GW Instek GSP-930 Programming Manual - Manual (Page 69)

REMOTE CONTROL
67
Query Syntax :CALCulate:ACPR:CHPower?
Return parameter <NR3> Power
Query Example :CALC:ACPR:CHP?
>-1.028e+02
:CALCulate:ACPR:STATe
Set
Query
Description Sets or queries the state of the ACPR measurement
function.
Syntax :CALCulate:ACPR:STATe {OFF|ON|0|1}
Query Syntax :CALCulate:ACPR:STATe?
Parameter 0 ACPR is disabled.
1 ACPR is enabled.
OFF ACPR is disabled.
ON ACPR is enabled.
Return parameter 0 ACPR is disabled.
1 ACPR is enabled.
Query Example :CALC:ACPR:STAT?
>1
:CALCulate:CNR:RESult?
Query
Description Returns the CNR measurement result in dB.
Query Syntax :CALCulate:CNR:RESult?
Return parameter <NR3> CNR measurement in dB
Query Example :CALC:CNR:RES?
>-4.959e+01
:CALCulate:CNR:STATe
Set
Query
Description Sets or queries the state of the CNR measurement
function.
Syntax :CALCulate:CNR:STATe {ON|OFF|1|0}