GW Instek GSP-930 Programming Manual - Manual (Page 127)

REMOTE CONTROL
125
[:SENSe]:ASET:SPAN
Set
Query
Description Sets or queries the Autoset span.
Syntax [:SENSe]:ASET:SPAN <freq>
Query Syntax [:SENSe]:ASET:SPAN?
Parameter <freq> <NRf>
Return parameter <NR3> Hz
Example ASET:SPAN 2.0e+6
[:SENSe]:ASET:SPAN:AUTO
Set
Query
Description Turns the Autoset span to auto or manual or
queries its state.
Syntax [:SENSe]:ASET:SPAN:AUTO {OFF|ON|0|1}
Query Syntax [:SENSe]:ASET:SPAN:AUTO?
Parameter 0 Turn Autoset span to manual (off).
1 Turn Autoset span to automatic (on).
OFF Turn Autoset span to manual (off).
ON Turn Autoset span to automatic (on).
Return parameter 0 Autoset span is set to manual (off).
1 Autoset span is set to automatic (on).
Example :ASET:SPAN:AUTO
[:SENSe]:AVERage:COUNt
Set
Query
Description Sets or queries the number of traces that are used
with the average function.
Syntax [:SENSe]:AVERage:COUNt <integer>
Query Syntax [:SENSe]:AVERage:COUNt?