GW Instek GSP-930 Programming Manual - Manual (Page 169)

REMOTE CONTROL
167
Parameter <n> Wake-up clock number 1 to 7
0 Turn the wake-up clock off.
1 Turn the wake-up clock on.
OFF Turn the wake-up clock off.
ON Turn the wake-up clock off.
Return parameter 0 The wake-up clock is off.
1 The wake-up clock is on.
Example :SYST:CLOC1:STATE 1
:SYSTem:CLOCk<n>:TIME
Set
Query
Description Sets the alarm time for the selected wake-up clock.
Syntax :SYSTem:CLOCk<n>:TIME <hour>,<minute>
Query Syntax :SYSTem:CLOCk<n>:TIME?
Parameter/
Return parameter <hour> <NR1> Sets the alarm hour.
<minute> <NR1> Sets the alarm minute.
<n> Wake-up clock number 1 to 7
Example :SYST:CLOC1:TIME 20,50
:SYSTem:COMMunicate:GPIB[:SELF]
:ADDRess
Set
Description Sets the GPIB address.
Syntax :SYSTem:COMMunicate:GPIB[:SELF]:ADDRess
<integer>
Parameter <integer> 0 to 30
Example :SYST:COMM:GPIB:ADDR 10
:SYSTem:COMMunicate:LANReset
Set
Description Reset the LAN configuration and reboot.
Syntax :SYSTem:COMMunicate:LANReset
Example :SYST:COMM:LANR