GW Instek GSP-930 Programming Manual - Manual (Page 82)

GSP-930 Programming Manual
80
Example :CALC:MARK1:FCO:RES?
>1.0e+3
:CALCulate:MARKer<n>:FCOunt:
RESolution:AUTO
Set
Query
Description Sets the frequency counter resolution Auto setting
on/off.
Syntax :CALCulate:MARKer<n>:FCOunt:RESolution:AUTO
{ON|OFF|1|0}
Query Syntax :CALCulate:MARKer<n>:FCOunt:RESolution:AUTO?
Parameter <n> <NR1>Marker number 1~6
0 Auto is off.
1 Auto is on.
OFF Auto is off.
ON Auto is on.
Return parameter 0 Auto is off.
1 Auto is on.
Example :CALC:MARK1:FCO:RES:AUTO?
:CALCulate:MARKer<n>:FCOunt:STATe
Set
Query
Description Sets or queries the state of the frequency counter
function.
Syntax :CALCulate:MARKer<n>:FCOunt:STATe {ON|OFF|1|0}
Query Syntax :CALCulate:MARKer<n>:FCOunt:STATe?
Parameter <n> <NR1>Marker number 1~6
0 Turn frequency counter off.
1 Turn frequency counter on.
OFF Turn frequency counter off.
ON Turn frequency counter on.
Return parameter 0 Frequency counter is off.
1 Frequency counter is on.
Example :CALC:MARKer1:FCO:STAT 1