Allied Telesis AT-FS970M Series - Manual (Page 1006)

Chapter 65: Private Port VLAN Commands
1006
SWITCHPORT MODE PRIVATE-VLAN PROMISCUOUS
Syntax
switchport mode private-vlan promiscuous vid
Parameters
vid
Specifies the VID of a private port VLAN to which you are adding a
promiscuous uplink port.
Mode
Port Interface mode
Description
Use this command to add a promiscuous uplink port to a private port
VLAN. A promiscuous port can be an uplink port of just one private VLAN
at a time.
Confirmation Command
“SHOW VLAN PRIVATE-VLAN” on page 1004
Example
This example adds port 14 as an uplink port to a private port VLAN with
the VID 15:
awplus> enable
awplus# configure terminal
awplus(config)# interface port1.0.14
awplus(config-if)# switchport mode private-vlan promiscuous
15