Allied Telesis AT-FS970M Series - Manual (Page 622)

Chapter 42: DHCP Snooping Commands
622
CLEAR ARP SECURITY STATISTICS
Syntax
clear arp security statistics interface port-list
Parameters
interface
Specifies a port list.
Mode
Privileged Exec mode
Description
Use this command to clear ARP security violations from the specified
ports. For information about defining ARP security violations, see “ARP
SECURITY VIOLATION” on page 620.
For instructions about how to specify ports, see “Port Numbers in
Commands” on page 67.
Confirmation Command
“SHOW RUNNING-CONFIG” on page 166
Example
This example clears the ARP security violations on ports 20-24:
awplus> enable
awplus# configure terminal
awplus(config)# interface port1.0.20-port1.0.24
awplus(config-if)# clear arp security statistics