Allied Telesis AT-FS970M Series - Manual (Page 1880)

Chapter 105: Routing Information Protocol (RIP) Commands
1880
Examples
The following example displays RIP information about VLAN 5:
awplus# show ip route interface vlan5
The following example displays RIP information about all of the RIP-
enabled VLAN interfaces on the switch.:
awplus# show ip route interface
Recv
Indicates the version of RIP packets
accepted on the VLAN routing interface.
The version value is one of the following:
 RIP1
 RIP2
 Both
Auth Indicates the authentication method. The
method is one of the following:
 PASS: Plain-text password
 MD5: MD5 password
 NONE
Password Indicates the status of the password. The
indication is one of the following:
 ********: A plain-text or MD5 password
is set.
 NOT SET
PoisonReverse Indicates the status of poison reserve on
the VLAN routing interface.
AutoSummary Indicates the status of auto-summary on
the VLAN interface.
Table 259. SHOW IP RIP INTERFACE Command (Continued)
Parameter Description