Allied Telesis AT-FS970M Series - Manual (Page 911)

AT-FS970M Switch Command Line User’s Guide
911
Examples
This example adds ports 5 and 7 as untagged ports to a VLAN with the
VID 12:
awplus> enable
awplus# configure terminal
awplus(config)# interface port1.0.5,port1.0.7
awplus(config-if)# switchport access vlan 12
This example returns port 15 as an untagged port to the Default_VLAN,
which has the VID 1:
awplus> enable
awplus# configure terminal
awplus(config)# interface port1.0.15
awplus(config-if)# switchport access vlan 1
Returning ports to the Default_VLAN can also be accomplished with the
NO SWITCHPORT ACCESS VLAN. See “NO SWITCHPORT ACCESS
VLAN” on page 904.