Allied Telesis AT-FS970M Series - Manual (Page 474)

Chapter 28: DHCP Relay Commands
474
IP DHCP-RELAY AGENT-OPTION
Syntax
ip dhcp-relay agent-option
Parameters
None
Mode
Global Configuration mode
Description
Use this command to configure the DHCP relay agent to insert its option
82 information into the client-request packets it relays to the DHCP
servers. This command must be used with “IP DHCP-RELAY
INFORMATION POLICY” on page 476.
Confirmation Command
“SHOW IP DHCP-RELAY” on page 487
Example
This example configures the DHCP relay agent to insert its option 82
information in the client-request packets:
awplus> enable
awplus# configure terminal
awplus(config)# ip dhcp-relay agent-option