Allied Telesis AT-FS970M Series - Manual (Page 1072)

Chapter 70: 802.1x Port-based Network Access Control Commands
1072
“SHOW DOT1X” on page 1113 Privileged Exec Displays whether 802.1x port-based
network access control is enabled or
disabled on the switch and the IP
address of the RADIUS server.
“SHOW DOT1X INTERFACE” on
page 1114 Privileged Exec Displays the parameter settings of
authenticator ports.
“SHOW DOT1X STATISTICS
INTERFACE” on page 1115 Privileged Exec Displays EAP packet statistics on
authenticator ports.
“SHOW DOT1X SUPPLICANT
INTERFACE” on page 1116 Privileged Exec Displays the supplicant state on
authenticator ports.
Table 113. 802.1x Port-based Network Access Control Commands (Continued)
Command Mode Description