Allied Telesis AT-FS970M Series - Manual (Page 1685)

AT-FS970M Switch Command Line User’s Guide
1685
CLASS-MAP
Syntax
class-map name
Parameters
name
Specifies the name of a class map.
Mode
Global Configuration mode
Description
Use this command to create a class map and access the Configuration
Class Map mode.
Use the no form of this command, NO CLASS-MAP, to delete a class map.
Confirmation Command
“SHOW RUNNING-CONFIG” on page 166
Examples
To create a class map called “cmap1” and access the Configuration Class-
map mode, do the following:
awplus> enable
awplus# configure terminal
awplus(config)# class-map cmap1
awplus(config-cmap)#
To delete a class map called “cmap1,” do the following:
awplus> enable
awplus# configure terminal
awplus(config)# no class-map cmap1