Allied Telesis AT-FS970M Series - Manual (Page 1612)

Chapter 97: ACL Commands
1612
NO ACCESS-LIST
Syntax
no access-list id_number
Parameters
id_number
Specifies the ID number of an access list you want to delete from
the switch. You can delete one access list at a time with this
command.
Mode
Global Configuration mode
Description
Use this command to delete ACLs from the switch. ACLs must first be
removed from their port assignments before they can be deleted. For
instructions, refer to “NO ACCESS-GROUP” on page 1613 and “NO MAC
ACCESS-GROUP” on page 1614.
Confirmation Command
“SHOW ACCESS-LIST” on page 1619
Example
This example deletes the access list with the ID number 3015 from the
switch:
awplus> enable
awplus# configure terminal
awplus(config)# no access-list 3015
awplus(config-if)# end
awplus# show access-list