Crypto certificate destroy 4, Crypto certificate destroy – Allied Telesis AT-FS970M Series User Manual
Page 1444
Chapter 93: Secure HTTPS Web Browser Server Commands
1444
CRYPTO CERTIFICATE DESTROY
Syntax
crypto certificate
id_number
destroy
Parameters
id_number
Specifies the ID number of a certificate to be deleted from the
switch. The range is 0 to 10. You can enter just one ID number.
Mode
Global Configuration mode
Description
Use this command to delete unused certificates from the switch. You can
delete just one certificate at a time with this command.
Entering the WRITE or COPY RUNNING-CONFIG STARTUP-CONFIG
command after deleting a certificate is unnecessary because certificates
are not stored in the active boot configuration file.
Confirmation Command
Example
This example deletes the certificate with the ID number 5:
awplus> enable
awplus# configure terminal
awplus(config)# crypto certificate 5 destroy