Allied Telesis AT-FS970M Series - Manual (Page 921)

AT-FS970M Switch Command Line User’s Guide
921
Description
Use this command to create port-based and tagged VLANs. You can
create just one VLAN at a time.
Confirmation Command
“SHOW VLAN” on page 908
Examples
This example creates a new VLAN with the VID 5 and the name
Engineering:
awplus> enable
awplus# configure terminal
awplus(config)# vlan database
awplus(config-vlan)# vlan 5 name Engineering
This example creates a new VLAN with the VID 17 and the name
Manufacturing:
awplus> enable
awplus# configure terminal
awplus(config)# vlan database
awplus(config-vlan)# vlan 17 name Manufacturing
This example creates new VLANs with the VIDs 6 to 11, 15 and 23:
awplus> enable
awplus# configure terminal
awplus(config)# vlan database
awplus(config-vlan)# vlan 6-11,15,23