Allied Telesis AT-FS970M Series - Manual (Page 1845)

AT-FS970M Switch Command Line User’s Guide
1845
“ROUTER RIP” on page 1874 Global
Configuration Enters the Routing Configuration
mode to configure RIP.
“SHOW IP RIP” on page 1875 User Exec and
Privileged Exec Displays information about RIP
routes.
“SHOW IP RIP COUNTER” on
page 1877 User Exec and
Privileged Exec Displays counters for RIP packets on
the switch.
“SHOW IP RIP INTERFACE” on
page 1879 User Exec and
Privileged Exec Displays RIP information about the
specified VLAN routing interface.
“TIMERS BASIC” on page 1881 Routing
Configuration Specifies the update, timeout, and
garbage timers.
“VERSION” on page 1883 Routing
Configuration Specifies a RIP Version 1, or 2, used
by the switch.
Table 256. RIP Commands (Continued)
Command Mode Description