Allied Telesis AT-FS970M Series - Manual (Page 1617)

AT-FS970M Switch Command Line User’s Guide
1617
PERIODIC (DAILY)
Syntax
periodic day (daily|weekdays|weekend) time (hh:mm:ss) to
time (hh:mm:ss)
Parameters
day
Specifies a range of days. Enter one of the following:
daily (Monday through Sunday)
weekdays (Monday through Friday)
weekend (Saturday and Sunday)
time
Indicates the time of day which is expressed in a 24-hour clock and
specified in hours:minutes:seconds.
Mode
Time-Range mode
Description
Use this command to set a daily, weekday, or weekend time range for ACL
filtering.
To remove the date and time range, use the NO PERIODIC command.
Confirmation Command
“SHOW INTERFACE ACCESS-GROUP” on page 1621
Examples
This example sets the date and time range from 9 am Monday morning to
5 pm Friday evening:
awplus> enable
awplus# configure terminal
awplus(config)# time-range
awplus(config-time-range)# periodic daily 09:00:00 to
17:00:00