Allied Telesis AT-FS970M Series - Manual (Page 819)

AT-FS970M Switch Command Line User’s Guide
819
SPANNING-TREE ERRDISABLE-TIMEOUT INTERVAL
Syntax
spanning-tree errdisable-timeout interval interval
Parameters
interval
Specifies the number of seconds that ports remain disabled by the
RSTP BPDU guard feature. The range is 10 to 1000000 seconds.
The default is 300 seconds.
Mode
Global Configuration mode
Description
Use this command to specify the number of seconds that must elapse
before the switch automatically enables ports that are disabled by the
RSTP BPDU guard feature. To activate the timer, refer to “SPANNING-
TREE ERRDISABLE-TIMEOUT ENABLE” on page 818.
Confirmation Command
“SHOW RUNNING-CONFIG” on page 166
Example
This example sets the time interval to 200 seconds:
awplus> enable
awplus# configure terminal
awplus(config)# spanning-tree errdisable-timeout interval
200