Allied Telesis AT-FS970M Series - Manual (Page 1426)

Chapter 91: Non-secure HTTP Web Browser Server Commands
1426
NO SERVICE HTTP
Syntax
no http server
Parameters
None
Mode
Global Configuration mode
Description
Use this command to disable the HTTP web browser server on the switch
to prevent any further remote management with a web browser. Any
active web browser management session are interrupted and are not
allowed to continue. You might disable the server to prevent remote web
browser management sessions of the switch or in prelude to activating the
secure HTTPS web browser server.
Confirmation Command
“SHOW IP HTTP” on page 1427.
Example
This example disables the HTTP web browser server on the switch:
awplus> enable
awplus# configure terminal
awplus(config)# no service http