Allied Telesis AT-FS970M Series - Manual (Page 542)

Chapter 34: Boot Configuration Files
542
Displaying the Active Boot Configuration File
To display the name of the active boot configuration file on the switch, go
to the Privileged Exec mode and enter the SHOW BOOT command. Here
is the command:
awplus# show boot
Here is an example of the information.
Figure 112. SHOW BOOT Command
The “Current boot config” field displays the name of the active boot
configuration file, which for the switch in the example is “switch2.cfg.” The
rest of the fields are defined in Table 57 on page 550.
Current software : v2.1.1
Current boot image : v2.1.1
Backup boot image
: Not set
Default boot config: /cfg/boot.cfg
Current boot config: /cfg/switch2.cfg (file exists)