Allied Telesis AT-FS970M Series - Manual (Page 1672)

Chapter 98: Quality of Service (QoS)
1672
The CoS values in the first line are matched with the egress queue
assignments in the second line. For example, in Figure 258 on page 1671,
port 1 packets with a CoS value of 0 are placed in egress queue 2,
packets with a CoS value of 1 are placed in egress queue 0, and so on.
For more information about this command, see “SHOW MLS QOS MAPS
COS-QUEUE” on page 1673.
Displaying DSCP
to Queue
Mappings
Use this command to display the mappings of DSCP values to egress
queues. The syntax of this command is:
show mls qos maps dscp-queue
See Figure 259 on page 1673 for an example of this information. For more
information about this command, see “SHOW MLS QOS MAPS DSCP-
QUEUE” on page 1674.