Allied Telesis AT-FS970M Series - Manual (Page 1757)

AT-FS970M Switch Command Line User’s Guide
1757
SHOW MLS QOS MAPS POLICED-DSCP
Syntax
show mls qos maps policed-dscp <0-63>
Parameters
<0-63>
Specifies the DSCP value.
Mode
Privileged Exec mode
Description
Use this command to display the mapping between the existing DSCP
value and the new DSCP value. This mapping is set with the MLS QOS
MAPS POLICED-DSCP command. For more information about this
command, see “MLS QOS MAP POLICED-DSCP” on page 1720. See
Figure 272 for an example display of the SHOW MLS QOS MAPS
POLICED-DSCP command.
Figure 272. SHOW MLS QOS MAPS POLICED-DSCP Command
Example
The following example displays the mappings between the existing DSCP
with a value of 5 and the new DSCP value.
awplus> enable
awplus# show mls qos maps policed-dscp 5
POLICED-DSCP-MAP:
DSCP 5
-----------------
New DSCP 7