Allied Telesis AT-FS970M Series - Manual (Page 1204)

Chapter 75: sFlow Agent Commands
1204
SHOW SFLOW
Syntax
show sflow [database]
Parameters
None
Mode
Privileged Exec mode
Description
Use this command to display the settings of the sFlow agent on the switch.
The command displays the same information with or without the
DATABASE keyword. Here is an example of the information.
Figure 207. SHOW SFLOW Command
Number of Collectors: 1
Collector_address
UDP_port
================== ========
149.122.78.12 6343
Number of Samplers/Pollers 4
Port
Sample-rate Polling-interval
==== =========== ================
1.0.4 1000 60
1.0.12 1000 60
1.0.13 50000 2400
1.0.14 50000 2400
sFlow Status
============
Enable