Allied Telesis AT-FS970M Series - Manual (Page 480)

Chapter 28: DHCP Relay Commands
480
IP DHCP-RELAY SERVER-ADDRESS
Syntax
ip dhcp-relay server-address ipaddress
Parameters
ipaddress
Specifies the IP address of a DHCP server. You may specify only
one IP address at a time with this command.
Mode
Global Configuration mode
Description
Use this command to add the IP addresses of DHCP servers to the relay
agent. The agent can have up to five addresses, but you may add only
one address at a time with this command.
Confirmation Command
“SHOW IP DHCP-RELAY” on page 487
Example
This example adds the IP address 149.22.12.56 of a DHCP server to the
relay agent:
awplus> enable
awplus# configure terminal
awplus(config)# ip dhcp-relay server-address 149.22.12.56