Allied Telesis AT-FS970M Series - Manual (Page 1243)

AT-FS970M Switch Command Line User’s Guide
1243
CLEAR LLDP TABLE
Syntax
clear lldp table [interface port ]
Parameters
port
Specifies a port. You can specify more than one port at a time in
this command. Omitting this parameter specifies all the ports.
Mode
Privileged Exec mode
Description
Use this command to clear the LLDP and LLDP-MED information the
switch has received from its neighbors. You can delete all the information
the switch has amassed or only the information from neighbors on
selected ports.
Examples
This example clears the information the switch has received from all
neighbors:
awplus> enable
awplus# clear lldp table
This example clears the information the switch has received from the
neighbors connected to ports 6 and 8:
awplus> enable
awplus# clear lldp table interface port1.0.6,port1.0.8