Allied Telesis AT-FS970M Series - Manual (Page 1237)

AT-FS970M Switch Command Line User’s Guide
1237
Displaying Port TLVs
To view the TLVs of the individual ports on the switch, use the SHOW
LLDP LOCAL-INFO INTERFACE command in the User Exec mode or the
Privileged Exec mode. This command is useful whenever you want to
confirm the TLVs on the ports, such as after you have configured the ports
or if you believe that ports are not sending the correct information.
The command has this format:
show lldp local-info [interface port ]
To view the TLVs on all the ports, enter this command:
awplus# show lldp local-info
This example displays the TLVs currently configured on port 2:
awplus# show lldp local-info interface port1.0.2
Refer to Figure 213 on page 1283 and Figure 214 on page 1284 for an
example of the information. The fields are defined in Table 131 on
page 1286.