Allied Telesis AT-FS970M Series - Manual (Page 862)

Chapter 57: MSTP Commands
862
SHOW SPANNING-TREE MST CONFIG
Syntax
show spanning-tree mst config
Parameters
None
Mode
Privileged Executive Mode
Description
Use this command to display the MSTP configuration information for a
bridge. Use the display to check that the digest is the same on this device
as for all other devices in the same region.
Example
This example displays the MSTP configuration information for a bridge:
awplus> enable
awplus# show spanning-tree mst config
An example of the display is shown in Figure 165.
Figure 165. SHOW SPANNING-TREE MST CONFIG Command
%
% MSTP Configuration Information for bridge 0:
% -----------------------------------------------------------------
%
Format Id: 0
% Name:
% Revision Level: 0
% Digest: 0xAC36177F50283CD4B83821D8AB26DE62
% -----------------------------------------------------------------