Allied Telesis AT-FS970M Series - Manual (Page 1775)

AT-FS970M Switch Command Line User’s Guide
1775
Displaying Port Storm Status
To display the storm status for the specified port, use the SHOW MLS
QOS INTERFACE STORM-STATUS command. This is the command
syntax:
show mls qos interface port storm-status
See Figure 275 for an example of the information displayed by this
command. For more information about this command, see “SHOW MLS
QOS INTERFACE STORM-STATUS” on page 1778.
Figure 275. SHOW MLS QOS INTERFACE STORM-STATUS Command
Interface: port1.0.12
Storm-Protection: Enabled
Port-status: Enabled
Storm Action: vlandisable
Storm Window: 5000 ms
Storm Downtime: 15 s
Timeout Remaining: 0 s
Last read data-rate: 0 kbps
Storm Rate:
1000 kbps