Allied Telesis AT-FS970M Series - Manual (Page 616)

Chapter 41: IGMP Snooping Querier Commands
616
Example
This example displays the status of IGMP snooping querier on the Default
VLAN, which has the ID number 1:
awplus> enable
awplus# show ip igmp interface vlan1
IGMP Snooping The status of IGMP snooping on the switch. The
commands for enabling and disabling this feature
are “IP IGMP SNOOPING” on page 591 and “NO
IP IGMP SNOOPING” on page 596.
IGMP snooping
querier The status of IGMP snooping querier in the
VLAN. The commands for enabling and disabling
the feature are “IP IGMP SNOOPING QUERIER”
on page 613 and “NO IP IGMP SNOOPING
QUERIER” on page 614, respectively.
Table 68. SHOW IP IGMP INTERFACE Command (Continued)
Field Definition