Allied Telesis AT-FS970M Series - Manual (Page 1730)

Chapter 99: Quality of Service (QoS) Commands
1730
NO POLICE AGGREGATE
Syntax
no police aggregate name
Parameters
name
Indicates the name of a police aggregate.
Mode
Policy Map Class mode
Description
Use this command remove the association between a either a single-rate
aggregate policer or a twin-rate aggregate policer and a class map.
Example
This example removes the association between a class map called
“classname1” and an aggregate policer called “singlerate:”
awplus> enable
awplus# configure terminal
awplus(config)# policy-map pmap2
awplus(config-pmap)# class classname1
awplus(config-pmap-c)# no police singlerate