Allied Telesis AT-FS970M Series - Manual (Page 1149)

AT-FS970M Switch Command Line User’s Guide
1149
SNMP-SERVER COMMUNITY
Syntax
snmp-server community community rw|ro
Parameters
community
Specifies a new community string. The maximum length is 40
alphanumeric and/or special characters, such as, !@#$%^&*?<>.
The name is case sensitive. Spaces are not allowed.
rw|ro
Specifies the access level of a new community string, of read-write
(RW) or read-only (RO).
Mode
Global Configuration mode
Description
Use this command to create new SNMPv1 and SNMPv2c community
strings on the switch. The switch can have up to eight community strings.
Confirmation Command
“SHOW SNMP-SERVER COMMUNITY” on page 1145
Example
This example creates the new community string “stea2a,” with an access
level of read-write:
awplus> enable
awplus# configure terminal
awplus(config)# snmp-server community stea2a rw