Allied Telesis AT-FS970M Series - Manual (Page 1102)

Chapter 70: 802.1x Port-based Network Access Control Commands
1102
NO AAA AUTHENTICATION DOT1X DEFAULT GROUP RADIUS
Syntax
no aaa authentication dot1x default group radius
Parameters
None
Mode
Global Configuration mode
Description
Use this command to disable 802.1x port-based network access control
on the switch. All ports forward packets without any authentication. This is
the default setting.
Confirmation Command
“SHOW DOT1X” on page 1113
Example
This example disables 802.1x port-based network access control on the
switch:
awplus> enable
awplus# configure terminal
awplus(config)# no aaa authentication dot1x default group
radius