Allied Telesis AT-FS970M Series - Manual (Page 650)

Chapter 42: DHCP Snooping Commands
650
SHOW ARP SECURITY STATISTICS
Syntax
show arp security statistics detail [ interface <port-list> ]
Parameters
detail
Displays detailed statistics.
interface
Indicates the list of ports.
Mode
Privilege Exec mode
Description
Use this command to display ARP security statistics for the specified ports
or all ports.
Example
This example displays the brief statistics about ARP security:
awplus> enable
awplus# show arp security statistics
See Figure 122 for a sample display. See Table 72 on page 651 for an
explanation of the parameters in this display.
Figure 122. SHOW ARP SECURITY STATISTICS Command
awplus# show arp security statistics
DHCP Snooping ARP Security Statistics:
In In
Interface Packets Discards
-----------------------------------------
port1.0.3 20 20
port1.0.4 30 30
port1.0.12 120 0