Allied Telesis AT-FS970M Series - Manual (Page 1859)

AT-FS970M Switch Command Line User’s Guide
1859
NO AUTO-SUMMARY
Syntax
no auto-summary
Parameters
None
Mode
Routing Configuration mode
Description
Use this command to disable automatic summarization for RIP Version 2.
When automatic summarization is disabled, subnets are included in the
routing updates. Automatic summarization cannot be disabled for RIP
Version 1.
Confirmation Command
“SHOW IP RIP INTERFACE” on page 1879
Example
The following example disables automatic summarization for RIP Version
2:
awplus> enable
awplus# configure terminal
awplus(config)# router rip
awplus(config-router)# version 2
awplus(config-router)# no auto-summary