Allied Telesis AT-FS970M Series - Manual (Page 64)

Chapter 1: AlliedWare Plus Command Line Interface
64
Figure 15. VLAN DATABASE Command
LOCATION
CIVIC-
LOCATION
Command
You use this command to move from the Global Configuration mode to the
Civic Location mode, to create LLDP civic location entries. The format of
the command is:
location civic-location id_number
This example assigns the ID number 16 to a new LLDP civic location
entry:
Figure 16. LLDP LOCATION CIVIC-LOCATION Command
LOCATION
COORD-
LOCATION
Command
You use this command to move from the Global Configuration mode to the
Coordinate Location mode, to create LLDP coordinate location entries.
The format of the command is:
location coord-location id_number
This example assigns the ID number 8 to a new LLDP coordinate location
entry:
Figure 17. LLDP LOCATION COORD-LOCATION Command
awplus(config)# vlan database
awplus(config-vlan)#
awplus(config)# location civic-location 16
awplus(config-civic)#
awplus(config)# location coord-location 8
awplus(config-coord)#