Allied Telesis AT-FS970M Series - Manual (Page 1778)

Chapter 101: QSP Commands
1778
SHOW MLS QOS INTERFACE STORM-STATUS
Syntax
show mls qos interface port storm-status
Parameters
port
Specifies the port to display. You can view only one port at a time.
Mode
Privileged Exec mode
Description
Use this command to display the storm status for the specified port. See
Figure 276 for an example of this information.
Figure 276. SHOW MLS QOS INTERFACE STORM-STATUS Command
For an explanation of the fields in Figure 276, see Table 248.
Interface: port1.0.5
Storm-Protection: Enabled
Port-status: Enabled
Storm Action: vlandisable
Storm Window: 5000 ms
Storm Downtime: 15 s
Timeout Remaining: 0 s
Last read data-rate: 0 kbps
Storm Rate:
1000 kbps
Table 248. SHOW MLS QOS INTERFACE STORM-STATUS Command
Description
Field Description
Interface Lists the name of the port.
Storm-Protection Indicates if the QSP feature is enabled or
disabled.
Port-status Indicates if the port is enabled or disabled.