Allied Telesis AT-FS970M Series - Manual (Page 451)

451
Chapter 26
Port Mirror Commands
The port mirror commands are summarized in Table 42.
Table 42. Port Mirror Commands
Command Mode Description
“MIRROR” on page 452 Port Interface Designates the destination port for
access control lists that use the copy-
to-mirror action.
“MIRROR INTERFACE” on page 453 Port Interface Creates the port mirror and adds ports
to the port mirror.
“NO MIRROR INTERFACE” on
page 455 Port Interface Removes source ports from the port
mirror and deletes the port mirror.
“SHOW MIRROR” on page 456 Privileged Exec Displays the destination port and
source ports of the port mirror.