Allied Telesis AT-FS970M Series - Manual (Page 166)

Chapter 8: Basic Switch Management Commands
166
SHOW RUNNING-CONFIG
Syntax
show running-config
Parameters
None
Modes
Privileged Exec mode
Description
Use this command to display the settings of the switch, in their equivalent
command line commands.
The command displays only the settings that have been changed from
their default values and includes those values that have not yet been
saved in the active boot configuration file. Parameters at their default
settings are not included in the running configuration file.
To display the port configuration settings, see “SHOW RUNNING-
CONFIG INTERFACE” on page 240.
Example
This example displays the switch settings:
awplus# show running-config