RADWAG BALANCES 3Y SERIES - Manual (Page 125)

- 125 -
1. Setup – access to balance’s
menu
2. Series
3. Sample
4. Weighing A
5. Weighing B
6. Weighing T+A
7. Delete value
25.1. Additional settings of differential weighing mode
The additional settings enable adjusting the working mode to user’s needs and
requirements. Access to these settings is described below:
Procedure:
1. Press grey coloured workspace
2. The display indicates menu of: Settings, Keys, Information, Printout
and Profile,
3. Press <Settings> key,
4. The display indicates functions related to differential settings
Differential weighing is related to the following settings:
− Threshold: mass value, as the value of maximal sample mass, e.g. filter
− Ambient conditions: (software option, in which the user sets the
requirement for giving ambient temperature and humidity values before
the weighing process: <Weighing A, Weighing T+A, Tarring T>)
o
NO, giving data on ambient conditions disabled ;
o
ONLINE, data on ambient conditions acquired from the ambient
conditions module, that is cooperating with the balance;
o
VALUE, temperature and humidity value have to be inserted by
the user, who reads the ambient conditions values from another
device controlling the ambient conditions.
− Maximal number of weighing records: (declaring number of
repetitions for the final weighing process <B> – Max 5 repetitions, the
setting is valid for all measuring series)
− For the other settings, follow the operation guidelines given in point
10.8. “Additional parameters on weighing process”.
25.2. Differential weighing – quick access keys
Each of working modes features a set of default quick access keys which are
automatically displayed on mode activation. The set of keys can be modified
by selecting other quick access keys to the bottom bar of the display. Such
process requires appropriate operator’s access level.