RADWAG BALANCES 3Y SERIES - Manual (Page 190)

- 190 -
30.3. WiFi settings
For balance equipped with WiFi module the top toolbar of the main display has
a respective WiFi icon:
Procedure:
− Select < Wifi> communication interface, next set the parameters:
• DHCP - Yes – No
• IP Addresse - 10.10.9.155
• Subnet mask - 255.255.255.0
• Default gateway - 10.10.8.244
Caution:
Above settings serve for informative purposes only. Transmission parameters must be
set with respect to local network.
Upon completing modifications, press key, you will see the following
message:
<Restart balance to make it operate with new settings>.
Go to weighing and restart balance.
The user may use <Available networks> option to view the list of networks
detected by the balance: