RADWAG BALANCES 3Y SERIES - Manual (Page 28)

- 28 -
Start-up procedure 3.3.1.
On unpacking and placing the balance onto its workstation it is necessary to
connect the weighing module and the terminal to mains. Next the user shall
proceed like in case of a standard design (description to be found further down
this manual).
Main window preview for a wireless connection solution is presented below.
Main window of a wireless connection solution features two extra icons when
compared to a standard design:
1. battery charge status icon
2. wireless connection icon
Operation and functions are identical like for standard design balances.
Icons description 3.3.2.
Battery charge status icon:
No. Icon
Description
1
Battery charging
2 Battery charged, terminal connected to mains
3 Battery charged, terminal not connected to mains
4 Battery status (about 50%), terminal not connected to mains
5 Minimal battery status, necessity of connecting the terminal to mains
Wireless connection icon:
1
2