RADWAG BALANCES 3Y SERIES - Manual (Page 168)

- 168 -
The following processes can be carried out in almost any of databases:
1. Adding entry to a database < >
2. Searching for a record in a database by name < >
3. Searching for a record in a database by code < >
4. Searching for a record in a database by date< >
5. Exporting database content to a data storage device through USB port
< >
6. Printing data on a specific record from a database < >
The above processes are carried out by pressing dedicated soft keys located in
the upper right corner of the display. Follow hints and commands displayed by
the balance’s software.
29.2. Products
Database of products contains names of all products that are weighed,
counted or controlled.
Procedure
•
Enter submenu < Databases>, and press < Products> field
•
Press < Add > key to add a new product to the database
•
Select one of available options:
List of parameters defined for a product:
1. Name
2. Description
3. Product code
4. EAN code
5. Mass [unit mass of a product]
6. Dosing power [enabled only in <Mass control> mode, and
determined in [%] from 0% to 100 %. It is operation power of the
automatic feeder PA-02/H.
The value of dosing power has to be determined by tests
dependent on size, shape and mass of dispensed parts
(pills)]
7. Min [Minimal mass for weighing the product using result
control thresholds – LO. Value of error <T1-> in working
mode <Mass control> determined as percent of the
nominal mass]
8. Max [Maximal mass for weighing the product using result
control thresholds – HI. Value of error <T1+> in working
mode <Mass control> determined as percent of the
nominal mass]
9. Tolerance [% value calculated in relation to mass (5), denoting
measuring area in which the measurement is
recognized as correct.