RADWAG BALANCES 3Y SERIES - Manual (Page 13)

- 13 -
2.3. Balances AS 3Y series
Carefully remove the balance from its packaging, remove the plastic and foil
transport protective elements. Gently place the balance in its intended place of
use. Install the weighing pan, and other elements according to below scheme.
Analytical balances AS 3Y series
A – balance with reading unit
d=0,01mg
B – balance with reading unit
d=0,1mg
On installing the balance in its
intended place of use, remove transport
lock (1) – press the lock gently and turn it
accordingly to OPEN/CLOSE instruction,
next remove the lock. Please retain the
lock should the device be transported in
the future. Next assembly:
2 – bottom shield of the weighing
chamber
3 – centering ring
4 – weighing pan
5 – pan shield
On assembling all components,
connect peripheral devices to the
balance, and plug the balance to
mains. Power socket is located at the
back of balance’s housing.
Balance with transport lock mounted on